How to Install a COMPLETELY New Front Suspension in your Car or Truck

Chia sẻ
Nhúng
  • Xuất bản 21 Th04, 2019
  • Learn how to replace the ENTIRE front suspension of your car in this two episode series. Here I will show you how to install a brand new wheel bearing, ball joints, control arms, tie rod, strut, and axle.
    The ball joint and wheel bearing has to be pressed into the knuckle and I have a bunch of tips and tricks to make that easy. I show how to properly install a tie rod (safely) and get an accurate measurement so you can get the car aligned. I also show you how to properly torque down bolts with bushings so you don't tear them. The rest of the suspension parts are pretty simple to install and then we go for a ride to see how much better the car handles!
    First EPISODE: vn-plus.com/kenh/0T_Ma_Jf2Qm
    How to Replace Sway Bar End Links: vn-plus.com/kenh/oSahxhRArnV
    How to Replace Wheel Bearing: vn-plus.com/kenh/AYlKIKtW_ef
    Tools and Products:
    Mevotech Suspension Parts: amzn.to/2VKrmfr
    Rust Paint: amzn.to/2Dg5yAV
    Impact gun: amzn.to/2It3KIo
    Torque Wrench: amzn.to/2UO2yFY
    Bearing Press: amzn.to/2Gh8tv3
    Ball Joint Press: amzn.to/2UTxEvR
    Silicone Paste: amzn.to/2DsSisN
    Grease Gun: amzn.to/2Iy11hm
    Chassis Grease: amzn.to/2IGc2g5
    → Become a ChrisFix Subscriber: vn-plus.com
    → Instagram: instagram.com/chrisfixit
    → Facebook: facebook.com/chrisfix8
    → Website: www.ChrisFixed.com
    → My Channel Home Page: vn-plus.com
    **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.**
    Disclaimer:
    Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.
  • Ô tô và Xe cộ

NHẬN XÉT • 6 321

  • ChrisFix
    ChrisFix  2 tháng trước +1735

    I am pumped now that the suspension is all good and the surprise at the end of the video! We are gonna have some fun with this car!
    PS I will have a car meetup in Toronto Canada this Tuesday. Check my stories on VN-plus, Instagram or Facebook page for more info!!!

    • RedondoBeach2
      RedondoBeach2 5 ngày trước

      Chris, you're videos keep me up late at night. An indication that they're awesome. Thank you for teaching me and giving me the confidence to work on my own car. 👍

    • Javier Cruz
      Javier Cruz 6 ngày trước

      Chris you should put install a air intake or turbo!

    • firebird14420
      firebird14420 8 ngày trước +1

      @ChrisFix Is putting a load on the control arms for all vehicles Chris? I've got a 03 Mazda MPV and it doesn't say to put a load on it in the Mazda Master Manual, wouldn't it?? Help please!!!

    • Bo Herrmannsen
      Bo Herrmannsen 14 ngày trước

      26:21 i feel like an idiot :-D

    • Bo Herrmannsen
      Bo Herrmannsen 14 ngày trước

      a little late to the party, but at 12:38 did you not forget a grease nipple?

  • Nick Pinto
    Nick Pinto Ngày trước

    Install the turbo kit already pleaseeeeee Its been 2 months already.....

  • ray ali
    ray ali Ngày trước

    You are brilliant. You will put the cowboys out of business.

  • AmtrakSurfliner768
    AmtrakSurfliner768 Ngày trước

    That car doesn't deserve you! So satisfying to watch.

  • Amj Fort Worth
    Amj Fort Worth Ngày trước

    The parts cost more than the cars worth lol

  • Erik Johnson
    Erik Johnson Ngày trước

    This video is killer. I'm going under my car to do this job next month, and now I know exactly what to do. Chris is the man!

  • King500able
    King500able Ngày trước

    😕 I realized that I wont be able to ever do this without a car

  • penn707
    penn707 Ngày trước

    535 watchers live in their moms basement

  • Paul Allen
    Paul Allen Ngày trước

    Every part is not brand new.......?

  • Usman Ghani
    Usman Ghani Ngày trước

    Where are more videos man

  • Jacob Gholston
    Jacob Gholston Ngày trước

    Chris fix plz help me I was on the free way and my car completely died. I lost power brakes power steering and now my car cranks really slowly and doesn’t start unless I give it gas. It has an overheating problem. Can you plz help me and give me some tips

  • Peter Marquez
    Peter Marquez Ngày trước

    Bro great video great work. Using those tools is a pain you explained it great thanx. I ended up taking em
    To a press

  • Auto 4Fun
    Auto 4Fun 2 ngày trước

    Needs a new paint job.
    Btw amazing work.

  • Nik
    Nik 2 ngày trước +1

    How many quarts of roofing tar did it take to paint the new suspension components?

  • Maymethejumping
    Maymethejumping 2 ngày trước

    I watch this like I’m not gonna pay someone to do it

  • ghostdog662
    ghostdog662 2 ngày trước

    You should also note that since you removed the calipers you should pump your brakes before you start driving.

  • jose leon
    jose leon 2 ngày trước

    Gracias por los subtítulos en español!

  • Jeffrey young
    Jeffrey young 2 ngày trước

    Keep doing the del sol videos its helping me do my 93

  • Daniel W
    Daniel W 2 ngày trước

    Hey Chris do they make a full front end kit for a 2014 Ford Escape??

  • Marcus Taber
    Marcus Taber 2 ngày trước

    Next up, K series conversion and rear disk conversion.

  • Delgado Franklin
    Delgado Franklin 3 ngày trước

    You’re amazing man

  • Oasis T
    Oasis T 3 ngày trước

    Is that Honda S2000?

  • Monanisa Mon
    Monanisa Mon 3 ngày trước

    You're awesome

  • Калоян Съев
    Калоян Съев 3 ngày trước

    Where can i see how much to tighten down every single nut?

  • Jacob Escobar
    Jacob Escobar 3 ngày trước

    If there is a clicking noise coming from pressing the clutch in and depressing around 2,000 rpm going from 1st into 2nd. Is that possibly the axel nut causing that sound

  • AmyirtanTolgakrky
    AmyirtanTolgakrky 3 ngày trước

    Good JOB MR FIX

  • Dave W
    Dave W 3 ngày trước

    now turbo!

  • Dave W
    Dave W 3 ngày trước

    nice brotha Chris Fix!

  • avalero13
    avalero13 3 ngày trước

    Thanks brother. Just saved me over a grand to get my duramax back tight.

  • Starvin Marvin
    Starvin Marvin 3 ngày trước

    I once was working on my tie rod laying down and a bird flew over and poop in my mouth

  • victor ayala
    victor ayala 3 ngày trước

    Why u take out the Bearing if u got new hub ?

  • Shark Kiss
    Shark Kiss 3 ngày trước

    make a fun video when ur car breaks down on the road ! a great idea for future !

  • Chris Holdsworth
    Chris Holdsworth 4 ngày trước

    Great video this will save a ton of money on garage bills

  • E-Nonymouse
    E-Nonymouse 4 ngày trước

    i'm all a-boot this video.

  • Kelvin Kooger
    Kelvin Kooger 4 ngày trước

    Hi Chris. Just a question. I noticed that the two screws holding the disc unit to the brake unit are missing. Any reason why not replace?

  • Deathcomes2all
    Deathcomes2all 4 ngày trước

    hate to be a n00b but i just did this on my parents car. Though i had some real issues with the snap ring on the lower ball joint. my pliers couldn't get the ring wide enough. i had to wrestle with it. i went to the parts and local hardware store to see about a bigger set for to do the other side with but they only carried the 2 I had already tried.
    Where did you get you pair @ChrisFix

  • the memer XD
    the memer XD 4 ngày trước

    25:43
    i realy want to hear that turbo kit

  • bound4wa
    bound4wa 4 ngày trước

    Hi thanks for the awesome videos. How are the mevotech parts doing since the install? Curious as I just picked up a civic and it needs a front end refresh.
    Thank you!

  • Random GAMER
    Random GAMER 4 ngày trước

    lmao 22:55 no brake pads

  • Qwerty Yee
    Qwerty Yee 4 ngày trước +1

    When you will upload replacing the headgasket of this Honda? Continue to inspire Chris fix. :) thank u

    • Raymond Noodels
      Raymond Noodels Ngày trước

      Thats simple. Get a cometic head gasket...and if you can afford it..i recommend some arp head studs. Make sure you get a good torque wrench..tq in the pattern. Find real deal honda specs...and..when i did my d series..i went ahead and had the machine shop hot tank it and do a valve adjustment.

  • King Bryant84
    King Bryant84 5 ngày trước +1

    Came back to this video can’t wait to see the turbo kit on it

  • Liam Byrne
    Liam Byrne 5 ngày trước

    How much did this cost, it's an old car not worth doing

  • Jeremiah Price
    Jeremiah Price 5 ngày trước

    All of these mevotec suspension components are chinese junk and will be bad within a year. Good job on the install but you wasted your time. If you have a honda find sankei 555 suspension parts or moog if u cant find 555.

  • TCircuitry
    TCircuitry 5 ngày trước

    Cannot Wait to see the turbo build!!!

  • juddadam2
    juddadam2 5 ngày trước

    And while I was waiting for the paint to dry, I made a 18 course meal for my wife while giving a neck massage, then boom, the🤏paint👉was✋dry👌

  • ARTDUSTRY Ent.
    ARTDUSTRY Ent. 5 ngày trước

    Mechanical Genius!!!!!

  • Keyzo Gakiya
    Keyzo Gakiya 5 ngày trước

    I love how excited he gets at the end

  • AnTiDoT
    AnTiDoT 5 ngày trước +6

    You need to open a POV channel where you drive, like ChrisPOV

  • Buro Dackel
    Buro Dackel 6 ngày trước

    also what do the stripes on the springs for?

  • Buro Dackel
    Buro Dackel 6 ngày trước

    It would have been better if he showed to press in the new bushings for each component

  • caviarxxx
    caviarxxx 6 ngày trước

    you made this look easy, boss :)

  • Maddawwg45
    Maddawwg45 6 ngày trước +1

    do u need to install new rear shocks as well ?

  • Thanez
    Thanez 7 ngày trước +5

    Never push my axle into the gearbox dry. Gotcha.

    • Chris Holdsworth
      Chris Holdsworth 4 ngày trước

      Always best to put gear oil on splines and change seal if high milage car

  • jammy46235
    jammy46235 7 ngày trước

    Chris you want to make go fix something that’s not broke yet just for the hell of it 😂

  • rabah belmiloud
    rabah belmiloud 7 ngày trước

    Just fantastic keep up

  • Kayden Weeks
    Kayden Weeks 7 ngày trước

    Just like Chris said, you don't wanna go in dry 😉

  • LoopyGaming
    LoopyGaming 7 ngày trước

    I wish u made the del sol the drift car cuz just imagine all the upgrades on the stang but on the del sol

  • Gabriel 2 Solis
    Gabriel 2 Solis 8 ngày trước +1

    Never Thought I'd tell Another Man This but ...Chris You're Amazing!! Grrr8 Video

  • Al Woolhouse
    Al Woolhouse 8 ngày trước +1

    Greetings from England. Superb video, subbed. I have a Toyota 4Runner truck needs new wheel bearing and axle boot. Was going to get it done in the shop (or garage as we would call it) but your clear directions have given me the confidence to tackle the job myself. Thanks.

    • ChrisFix
      ChrisFix  8 ngày trước +1

      Awesome! I’m glad the video was helpful!

  • Tanvir lamsar
    Tanvir lamsar 8 ngày trước

    TURBO KIT TURBO KIT TURBO KIT

  • Expert Infantryman
    Expert Infantryman 8 ngày trước

    Hey Chris! Can you make a list of all the new parts you put in and need for this video? Thank you for your great content!!!

  • Shadevv
    Shadevv 9 ngày trước

    waiting till u show us you installing the turbokit :D

  • Jason Bourne
    Jason Bourne 9 ngày trước

    Chris fix is legend.i love your work. i wish i could work with you i love to to learn car mechanics and this video help me alot all the way i am noob in this work but i will work hard and learn as much as i can i have old car in my garage and will practice on that car to get one day be like chris but need important tools first.

  • crocodile2006
    crocodile2006 9 ngày trước

    Why do I need to Twerk Down every time I do up a bolt?

  • Luis Sonoma
    Luis Sonoma 9 ngày trước

    Your videos are priceless! I did this three years ago and was still able to learn a lot from this video, thanks.

  • solebrth
    solebrth 9 ngày trước

    What was your total cost to do all this replacing Chris ?

  • Scheurer
    Scheurer 9 ngày trước

    why tf do i feel like whenever i try something like this at my car everything is at least 10 times as complicated xD

    • GokaiSilver
      GokaiSilver 7 ngày trước

      I think it's a side effect of skill. It looks much easier than it is.

  • Isidro
    Isidro 9 ngày trước

    Where is the next video
    "the installation of the ebay turbo"

  • edy Johnson
    edy Johnson 9 ngày trước +1

    different filming class& chris is great teacher
    superb !!!!!!!!!!!😮😬👍

  • Eric Manson
    Eric Manson 10 ngày trước

    i honestly dont know y im watching this. prolly cuz its 3 am n im dreamin bout my future car n jus imagining me moding my whip n like idk i guess its just a future thing do know bout. ya dig lol

  • Isaac Valdez
    Isaac Valdez 10 ngày trước

    Hey chris! Love your videos, though you forgot the hub centric rings for that aftermarket wheels :)

  • Robert Taylor
    Robert Taylor 10 ngày trước

    Made me smile when Chris was driving it afterwards and started clapping, he knows he did a great job!

  • Brett Duffus
    Brett Duffus 10 ngày trước

    is there a sway bar?

  • Sonal Patil
    Sonal Patil 10 ngày trước

    Wow that's a awesome wheels

  • Zaki_a350
    Zaki_a350 10 ngày trước

    Haha turbo kit will it fit in my Honda?

  • Kaven Gilbert
    Kaven Gilbert 10 ngày trước

    Is the turbo video out yet ?

  • Kaven Gilbert
    Kaven Gilbert 10 ngày trước

    Man i wish i had those videos when i was 20, seems simple looking at it but back then not so much

  • Peter Paul
    Peter Paul 10 ngày trước

    I just got a 94 del sol and cant wait to see the turbo video. thanks Chris!

  • TENNSUMITSUMA
    TENNSUMITSUMA 10 ngày trước

    25:10 why does it look like the struts need replacing here?! Is because it needs a strut tower bar, better sway bar or something?!

  • bottle doo
    bottle doo 11 ngày trước

    The next lotto 649 is 30 million $

  • GreatUsername
    GreatUsername 11 ngày trước

    What do you do with the old suspension parts?

  • W L
    W L 11 ngày trước

    These are the best. Thank you!

  • C Young
    C Young 12 ngày trước

    Thank you for your amazing videos, I was able to do a semi complete suspension rebuild on my vehicle. I couldn't believe the quote I got for this job at my mechanics shop. I walked away and said Chris can teach me this. I watched this video over 10x to gain the confidence. Thank you!!!

    • C Young
      C Young 12 ngày trước

      Oh I also replaced my Moms worn out sway bar links. She is super excited! Thank you so much for sharing your knowledge.

  • plane walker
    plane walker 12 ngày trước

    520 thumbs down please one of you explain why ...SERIOUSLY WHY ANY ONE WOULD THUMB DOWN WEIRD HATERS

    • TENNSUMITSUMA
      TENNSUMITSUMA 10 ngày trước

      because that's 520 (now 523) shops that can't charge $2000+ dollars in labor to do the same shit! I just looked at all the parts to do the exact same job on my car (minus all the tie rods because I did them a few months ago and the lower control arm because it looks new despite having 155,xxxk miles on it) and so far it's only $348.xx on amazon. I only need the cheapest oe equivalent for my 2012 mazda 6i daily beater, especially since i'm not doing uber anymore.

  • ZAINILEX
    ZAINILEX 12 ngày trước

    Could you possibly make a video showing how to change a drivetrain? Like converting the Del Sol, from front wheel drive to rear wheel drive?

  • ZAINILEX
    ZAINILEX 12 ngày trước +1

    1:12 Did we just get some video teasers???




    DriftStang Takes On crowd!?

  • Riley McCallister
    Riley McCallister 13 ngày trước +1

    Im going to get you a 10 pack of thread locker for Christmas

  • Franco Barrera
    Franco Barrera 13 ngày trước +1

    "Make sure it's going in straight."
    Me- "That's what she said ChrisFix, that's most definently what she said.

  • killerbanjo
    killerbanjo 14 ngày trước

    Great video! The only thing is, at 7:43 you should be pressing against the inside edge of the bearing though. Otherwise you will damage the bearing.

  • Andy X
    Andy X 14 ngày trước +3

    I love watching your videos. You are so knowledgeable and do such a good job of showing how its done.

  • Jay M.K
    Jay M.K 14 ngày trước

    I don't know why there are dislikes on this video!!

    • TENNSUMITSUMA
      TENNSUMITSUMA 10 ngày trước

      because that's (as of my posting) 523 shops that can't charge $2000+ dollars in labor to do the same shit! I just looked at all the parts to do the exact same job on my car (minus all the tie rods because I did them a few months ago and the lower control arm because it looks new despite having 155,xxxk miles on it) and so far it's only $348.xx on amazon. I only need the cheapest oe equivalent for my 2012 mazda 6i daily beater, especially since i'm not doing uber anymore.

  • Muhammad Kamal
    Muhammad Kamal 14 ngày trước

    I wish there was a channel like chrisfix for basically everything in life

  • Benji Khoo
    Benji Khoo 14 ngày trước

    hi Chris and everyone,
    not sure if Chris would be seeing this, but i have some issue with my ride.
    i have changed to a coilover, but it seems that my issue still persist. i do hope you could help.
    first is that whenever i go through a speed bump, those made bolted onto the ground type, my front seems to be making a flapping sound.
    i am unable to record it from the drive cabin.
    second, whenever i drive through a rough ground, there is sorta like a metal hitting metal sound even after changing my coilovers,
    i have check the bushing, all seems okay, could it be my steering rack? (rear wheel driven car)
    thank you in advance

    • TENNSUMITSUMA
      TENNSUMITSUMA 10 ngày trước +1

      @Benji Khoo i'm a computer technician not an auto mechanic but my first thought is to check all engine and transmission mounts.

    • Benji Khoo
      Benji Khoo 13 ngày trước

      @RICHARD RAHADI the coilovers were check... nothing wrong with it.... wheel clearance is good.. stock wheel, stock height... initially, suspected the stock shocks had issues, that is how the coilover is now in.. but it seems that the flapping sound persist everytime i clear a speed bump... how ever for the clanking sound when drive over uneaven road, im not sure if it is the steering rack...

    • RICHARD RAHADI
      RICHARD RAHADI 13 ngày trước

      Benji Khoo are the coil overs adjustable? Try to check the adjustments (compression, damping, ride height, etc), as for noise, check for clearance, remove wheel and move the suspension around

  • Dara Mony
    Dara Mony 15 ngày trước

    want to see you restore old mitsubishi pajero 1994

  • Carlos Ivan Saa
    Carlos Ivan Saa 15 ngày trước

    fantastik! great video including the previous video (pt 1) . easy does it....very instructive and i am not afraid anymore

  • squiggles-101
    squiggles-101 15 ngày trước

    How do you find the torque specs

  • WhatIph
    WhatIph 15 ngày trước

    I have a 94 civic ex coupe and I have a problem of whitch I cannot figure out, I’ve replace stabilizer link and tie rod end , on the left side on decelerationand accelaration there is one or two pops and when I make turns but only when I do those three things

  • Samantha Gulcharan
    Samantha Gulcharan 15 ngày trước

    O

  • The Devil in Frankenstein
    The Devil in Frankenstein 15 ngày trước

    Seriously, how long would it take to do one side if a novice were to take up this challenge? I only have weekends off.

    • TENNSUMITSUMA
      TENNSUMITSUMA 10 ngày trước

      My advice, start at the ass crack of dawn!

  • Rethinker167
    Rethinker167 15 ngày trước

    Hey chris I think a really neat build for the race is to install an engine block heater for us folk who live in the north where it gets chilly. maybe a fall video?